Crowding as an Agronomic Factor Determining the Development of Plants and the Productivity of Linseed (Linum usitatissimum L.)

ABSTRACT

Nine sowing densities of linseed were compared in a two-year experiment. Self-regulation of the density of a linseed stand resulted in a differentiated branching of the plants. The number of capsules on a linseed shoot, as well as seeds in the capsule, and the number of seeds from the shoot were highly varied from year to year, and there is even a stronger differentiation in the weight of 1000 seeds. Linear relationships were noted between the mass of seeds from the linseed plant and the number of capsules. The yield of linseed was affected by both factors. An increasing sowing rate reduced the seed yield from the shoot and the plant. At lower seeding rates, the lateral shoots contributed in the seeds yield of the plant to a higher degree compared to the main ones.     

Cutter mark cross method for improvement of contact stiffness by controlling distribution of real contact area

Contact surfaces do not make contact perfectly because such surfaces have a lot of asperities. The real contact area is much smaller than the nominal contact area, and the real contact areas has a non-uniform distribution because of the waviness in the contact surface. The contact stiffness is influenced not only by the deformation of the asperities, but also by the distribution of the real contact areas. In general, a contact surface with a uniform distribution of the real contact areas has greater contact stiffness. However, this requires a grinding finish and costs more than the cutting finish. In this study, a method for uniformly distributing the real contact areas easily, is proposed to improve the contact stiffness of a contact surface finished by cutting. The method is called the cutter mark cross (CMC) method. The allowable waviness in the CMC method is shown. In addition, the effect of the CMC method is investigated by experimentation. The results show that the real contact areas can be distributed uniformly using the CMC method. The horizontal and vertical contact stiffness can also be improved.     

采动影响区抽采钻井井身固化及抽采效果考察

为提高地面瓦斯抽采效果,对抽采期间钻井进行了窥视,发现当回采工作面推过地面钻井位置后,钻井井壁迅速破坏,无法充分发挥其应有的瓦斯抽采效应。通过对煤层顶板岩层受采动影响顶板活动过程的分析,优化地面抽采钻井井身结构,在原有的施工工艺上增加三开下筛管,增强钻孔的防护强度,抽采浓度提高了1.54.5倍,抽采纯量提高了1.55倍,工作面回风流和回风隅角瓦斯浓度显著下降,抽采效果明显提高。     

基于SARIMA-GRNN-SVM的短期商业电力负荷组合预测方法

针对短期商业电力负荷预测准确性与周期难以满足现有电力现货市场的问题,提出了一种基于SARIMAGRNN-SVM(seasonal autoregressive integrated moving average-generalized regression neural network-support vector machine)的商业电力负荷组合预测模型。首先,对商业电力负荷变化的周期规律与随机因素的复杂影响进行了分析;然后,结合以上分析,选用SARIMA和GRNN为单一预测模型对商业电力负荷进行预测,并利用SVM进行组合,实现日前商业电力负荷预测;最后,通过某商业综合体的电力负荷数据进行验证。所提组合预测模型较单一预测模型拥有更优的预测精度与鲁棒性,可以为短期商业电力负荷预测提供借鉴。     

南水北调中线工程受水区二期需调水量预测研究

2002年12月国务院批复了《南水北调工程总体规划》，明确中线工程分两期建设。目前，一期工程已经通水。近年来，随着社会经济的快速发展，受水区的人口、生产规模、节水水平、人们对环境的要求都发生了变化，因此有必要根据新的情况对受水区的用水需求重新预测。分析了城市化发展和城镇用水变化的新形势，依据流域、区域水资源规划成果，提出了中线二期工程受水区需调水量，并与《南水北调中线工程规划》提出的二期需调水量进行对比，以供各方参考。     

Robust Mapping for Mobile Robot Based on Immobile Area Grid Map Considering Potential Moving Objects

Mobile robots need Simultaneous Localization and Mapping (SLAM) for autonomous movement in human living environments. The occupancy grid map used in SLAM is a conventional method which makes a map by an occupancy probability in each grid. This method renews a map based on whether an object is observed or not. In order to remove moving objects from a map, an additional method is required. However, conventional methods deal only with actually moving objects, and potential moving objects (e.g., standing humans) are mapped as static objects. Furthermore, only binary states, used or not used, are given to each object in map updating. This paper proposes the immobility area grid map to represent a map by an immobility probability in each grid. The proposed method renews a map based on the identification of observed objects by a robot's sensors, in addition to whether an object is observed or not. We introduce the map update parameter, which is set adaptively from the certainty of identification result of the object. Observed objects can take continuous states, truly static—unknown—truly moving, according to the parameter value. Potential moving objects are not mapped if the parameter takes values corresponding to moving objects. The experimental results show robust mapping in dynamic environments including potential moving objects.     

The effect of various fire‐exposed surface dimensions on the spalling of concrete specimens

Concrete spalling due to fire exposure is often defined as the sudden detachment of fragments from a concrete surface. It can be quantified by various parameters of which weight loss and spalling depth are the most common ones. The risk of spalling is influenced by many factors such as concrete composition, heating rate and applied testing methods. A reduced scale testing method should be developed to analyse the spalling behaviour and to understand its effectiveness in more detail. As a subsection of this development, this study aimed to analyse the effect of different‐sized, circular heated areas in semi full‐scale fire tests. Therefore, vermiculite slabs with varying cut‐outs in their centre were placed between a specimen made of a spalling‐sensitive concrete and the combustion chamber. The combustion chamber was heated following a standard fire curve. Our experimental results show that the thermal expansion inside of equal‐sized specimens is strongly dependent on the size of the heated area. In addition, this area also affects thermal stresses. They decrease as a result of lower temperature gradients for tests with smaller unheated boundary areas. Apart from this, the analysis of fragments shows no correlation between their relative volume distribution and the heated area. Copyright © 2014 John Wiley & Sons, Ltd.     

基于“天空地”一体化技术的安全监测系统建设与应用

西藏江达县白格村金沙江右岸于2018年10月11日和2018年11月3日先后发生2次大规模滑坡—堰塞湖堵江事件,溃堰洪水对下游拉哇库区不良地质体的稳定性造成不同程度的影响。为保障下游水电站建设安全,对拉哇库区主要不良地质体建立了基于星载InSAR技术、无人机技术和地面传感器实时监测的“天空地”一体化监测预警体系,以多维空间采集技术获取变形信息,通过智能监控平台对信息及时进行处理、分析和可视化呈现,利用平台、短信等方式向相关人员进行分级告警,取得了较好的应用效果。     

PIXE study on recovery of making-technology of Chinese Longquan celadon made in the Southern Song Dynasty (1127–1279 CE)

Proton induced X-ray emission (PIXE) technique and factor analysis were used to study the recovery of making-technology of Chinese Longquan celadon made in the late Southern Song Dynasty (1127–1279 CE). Based on factor analysis, for the raw material for body and the recipe for glaze, there is a close but slightly different relationship between these Longquan celadons unearthed from the core area of Dayao and the non-core area, despite all the Longquan celadons belong to the high-calcium-glaze system. The chemical compositions of most of the tentative body and glaze samples are very close to those of Longquan celadons unearthed from the core area of Dayao and the non-core area. This study can provide a guidance for recovery of making-technology of Longquan celandon.